Catalogs / Manuals

Clarke Sales / Backflow Prevention Device Tester

P.O Box 220114 Newhall Ca 91322

Design

Integrity

27899 Smyth Drive, Valencia Ca 91355

Phone (661) 294-0901  Fax (661) 294-1175

Assurance

Call Today For Your Free Consultation

Where Innovative Minds Meet Real World Needs

Home
Reg Stations
LAUSD C-516
PVS-1000 Site Prep
PVS-1000 Install
PVS-1000 Maint & Rep
Catalogs / Manuals
Contact Us
Job Photos

This page contains links to files that are provided by the original equipment manufacturer or have been summarized from various standards.  Click on the type of equipment and then the appropriate selection if further information is required.

 

   
 
 

 

Pressure Control Valves

Valves used to control the system pressure at a constant set point or to regulate a maximum allowable system pressure limit.   

Type  Watts Model Material Size Range

Click Here

Diaphragm Actuated Automatic Control Valve 115-LAUSD ECDI / 304 SS 2" - 8" <>
Direct Acting Pressure Regulator   Brass / Bronze 1/2" - 2" <>
Back to Top

Strainers

Equipment designed to capture large particles and debris in the flow stream.

Type Watts Model Material Size Range Click Here
SS Y-Strainer 077-SS 304 SS 2" - 8" <>
CI Y-Strainer 077 CI CI 2" - 8" <>
Fire Service Strainer 077-BS ECCS 3" - 8" <>
Back to Top

Backflow Preventers

Backflow Preventers with USC Listings

Type Watts Model Material Size Range Click Here
RP - Reduced Pressure Principle 009M2QTPC Teflon Coated Bronze 1/2 - 2" <>
RP - Reduced Pressure Principle 009 ECCI 2 1/2" - 8" <>
RP - Reduced Pressure Principle 994 304 SS 2 1/2" - 8" <>

 Back to Top

Butterfly Valves

Valves used for maintenance shut-off and flow line isolation.

Type Watts Model Material Size Range Click Here
Lug Type Butterfly Valve with Handle DBF113 ss Wetted Parts 2" - 8" <>
Lug Type Butterfly Valve with Gear Op DBF113 ss Wetted Parts 6" - 8" <>
Lug Type Butterfly Valve with Position Lock DBF113 ss Wetted Parts 2" - 8" <>

Relief Valves

Valves used to eliminate "lock up" over-pressure conditions due to fixture shut-off.  These valves may also provide some reduction of over-pressure conditions in a flowing condition.

Type Watts Model Material Size Range Click Here
Direct Acting Spring Loaded Relief Valve   Bronze 1/2" - 2" <>

Groove Couplers

AWWAC60 groove couplers are used to take up line misalignments of the mating inlet and outlet pipe lines and flanges.  Stress Free connections are desired to the greatest possible degree.

Type Victaulic Model Material Size Range Click Here
Standard Groove Couplers  77S ECCI 1/2" - 4" <>

Piping Components

Piping Components used in the fabrication of the valve station include

Type  Model Material / Spec Size Range Click Here
Piping  NA ASTM ____ 304 SS 1/2" - 8" <>
Flanges NA AWWA Class C -  ZN Plated Carbon Steel 2" - 8" <>
Spacer Flanges NA   2" - 8" <>
Gaskets NA 1/8" EPDM 2" - 8" <>
Fasteners        
Test Cocks / Bleed Valves        
Nipples / Plugs        
Sealants        

 

 

Product X Parts Manual

This is a description of Product X Parts Manual

Format: .zip (1,240 k).
Last updated: January 03, 2002.

Back to Top
 

 


 

Questions or problems regarding this web site should be directed to clarkesales@sbcglobal.net.
Copyright © 2002 Clarke Sales. All rights reserved.
Last modified: 08/24/06.